In 1987 KEF introduced two new products, CR200F and CR250SW, specifically designed for in-wall use, responding to the increased demand for unobtrusive yet high performance loudspeakers in the domestic environment. Although KEF had supplied loudspeaker assemblies for in-wall mounting from the 1960s onwards, with such models as the K1 and K2 baffles, this was the first excursion into the new Custom Install market with purpose built bezels for the cavity wall application. The range was supplemented in 1989 with the CR160F and CR160Q.
Custom Series CR200F (1987-94)
A two-way system incorporating an 8" (200mm) bass driver and a 1" (25mm) soft dome tweeter with auto-resetting protection circuit.
A two-way system incorporating an 8" (200mm) bass driver and a 1" (25mm) soft dome tweeter with auto-resetting protection circuit.
Custom Series CR250SW (1987-94)
A 10" (250mm) passive subwoofer, optimized for the volume of a typical cavity wall location.
A 10" (250mm) passive subwoofer, optimized for the volume of a typical cavity wall location.
CR160F (1989-95)
CR160F was a 160mm (6.25") full range system available in round or square bezel.
CR160F was a 160mm (6.25") full range system available in round or square bezel.
CR160Q (1989-95)
CR160Q was a 160mm (6.25") two-way Uni-Q system available in round or square bezel.
CR160Q was a 160mm (6.25") two-way Uni-Q system available in round or square bezel.
Specifications: CR200F
System type: Two-way, in-wall/flush mounting
Enclosure type: Closed cavity
Dimensions (H x W x D): 326 x 254 x 96mm (12.8 x 10 x 3.8 inches)
Nominal impedance: 4 ohms
Amplifier requirements: 10-150W
Frequency response: 55Hz to 22kHz +/-2.0dB
Sensitivity: 90dB at 1m for 2.83V
Maximum output: 108dB
Finish: Black baffle with white bezel
Grille: White perforated metal
System: SP3087
Drive units: B200 bass unit (SP1232), T33 tweeter (SP1197)
Crossover: SP2129
System type: Two-way, in-wall/flush mounting
Enclosure type: Closed cavity
Dimensions (H x W x D): 326 x 254 x 96mm (12.8 x 10 x 3.8 inches)
Nominal impedance: 4 ohms
Amplifier requirements: 10-150W
Frequency response: 55Hz to 22kHz +/-2.0dB
Sensitivity: 90dB at 1m for 2.83V
Maximum output: 108dB
Finish: Black baffle with white bezel
Grille: White perforated metal
System: SP3087
Drive units: B200 bass unit (SP1232), T33 tweeter (SP1197)
Crossover: SP2129
Specifications: C250SW
System type: Flush mounting subwoofer system
Enclosure type: Closed cavity
Dimensions (H x W x D): 326 x 320 x 100mm (12.8 x 12.6 x 3.9 inches)
Nominal impedance: 4 ohms
Amplifier requirements: 10-150W
Frequency response: 32Hz to 150Hz +/-2.0dB
Sensitivity: 90dB at 1m for 2.83V
Maximum output: 112dB
Finish: Black baffle with white bezel
Grille: White perforated metal
System: SP3088
Drive units: B250 bass unit (SP1233)
Crossover: SP2130
System type: Flush mounting subwoofer system
Enclosure type: Closed cavity
Dimensions (H x W x D): 326 x 320 x 100mm (12.8 x 12.6 x 3.9 inches)
Nominal impedance: 4 ohms
Amplifier requirements: 10-150W
Frequency response: 32Hz to 150Hz +/-2.0dB
Sensitivity: 90dB at 1m for 2.83V
Maximum output: 112dB
Finish: Black baffle with white bezel
Grille: White perforated metal
System: SP3088
Drive units: B250 bass unit (SP1233)
Crossover: SP2130